How To Blind Hem Pants With Sewing Machine?

Table of Contents

Blind hems are a great way to keep your clothes and accessories looking their best. They’re also incredibly easy to do on a sewing machine, even if you’ve never done one before. All you need is some thread and time in front of your machine!

How do you sew a blind hem on a sewing machine?

To sew a blind hem on a sewing machine, you’ll need:

A twin needle that fits your machine.

A blind hem foot for your foot control (which will come with the twin needle).

The right stitch length and width settings for this type of fabric. (You can find this information in the user manual.)

Before you start, check that your thread is inserted into the top and bobbin correctly by turning off your sewing machine and manually spinning each by hand until they meet at their ends.

This step is essential because if they’re not lined up properly, it could cause problems later in the project when stitching gets difficult or stops altogether. If everything seems good here, go ahead and turn on your machine!

Measure the width of your blind hem and mark it on the fabric.

Fold the fabric under the mark and press.

Set your sewing machine to the blind hem stitch.

Sew along the fold, removing the fabric as you go.

Trim the excess fabric and press the hem.

How to hem pants with sewing machine for beginners?

When you get a new pair of pants or jeans, it’s often hard to know what size to buy. If you’re one of those people who has to try on every pair in the store before buying, you’re not alone.

But what if you want to hem your own pants? It’s not as complicated as it looks.

You’ll need:

Pants that are too long or too short

Thread (matching or contrasting)

Sewing machine and needle (or sewing machine and threader)

Scissors

Steps:

Measure how much fabric you need to cut off the bottom of the pants.

Fold the fabric under so that the raw edge is hidden and pin in place.

Sew a straight line across the fabric, removing the pins as you go.

Trim off any excess fabric close to the stitching.

Finish by pressing the hem with an iron.

Blind hem stitch sewing machine

The blind hem stitch is a very basic sewing machine stitch. It can be used to hem, sew a seam or make a seam stronger. The most common use is to hem jeans, but it can also be used to sew other types of fabric.

The blind hem stitch is an excellent way to finish the raw edge of your fabric without leaving any visible stitches. This is a popular technique for fabrics that are too delicate for an overcast stitch, such as lace and sheer fabrics. The blind hem stitch will also leave less bulk than other methods of finishing the raw edge of your fabric.

The blind hem stitch will make your garment look more professional, especially if you are making clothing for yourself or others. If you are new to sewing, consider practicing on scrap fabric before attempting this on your finished project!

How to hem pants with brother sewing machine

Brother sewing machines are great for basic sewing. If you have a brother sewing machine, you can easily hem your pants. Hemming pants is a simple task and quite easy to do.

To hem a pair of pants, you will need:

Pair of pants (with or without zipper)

Brother sewing machine

Scissors

Tape measure (optional)

The instructions below are for using a Brother sewing machine. If you have another sewing machine brand, please refer to the manual or ask an expert at your local fabric store.

Measure the length of the pants leg where you want to hem it. Mark this length with pins or chalk on one side seam of your pants leg, so you know how long they are supposed to be.

Cut off excess fabric from your pant leg so that only what will remain inside your pants remains. This will be used later as your hem allowance when sewing new hems on each side of your pants leg.

Turn up hem allowance (the extra material left over from step 2 above) about 1/4 inch (6mm) and press with an iron using a low heat setting. Pressing this extra material helps keep it from fraying as you sew it onto your pant leg later in this step 4).

Place right sides together with other pant leg pieces (this is where all these markings come in handy.

Step by Step Tutorial

How to blind hem pants by hand

To blind hem pants by hand, you’ll need a sewing machine with a zipper foot (or an invisible zipper foot) and some matching thread. You’ll also need to know how to sew a straight stitch and an overlock stitch on your sewing machine.

Step 1: Fold the pants half, with the right side facing out.

This will create a fold line on both legs, which is what you want.

Step 2: Fold down the edge of the hem to where you want it to end (about an inch).

Make sure that your original fold line is still visible.

Step 3: Take your needle and thread and start stitching along the hemline on one leg.

This should be about an eighth of an inch away from the edge of the material. Make sure not to stitch through both layers at once, as this could cause later problems with your blind hem.

Step 4: Fold your pants again so that both legs are showing with their original fold lines still visible.

At this point, you’ll notice a raw edge along where you sewed on one side of each leg—this is because when you sew by hand, it’s impossible to get under both layers of material without splitting them open at least a little bit. It’s important not to worry about this now; we’ll deal with them later!

Step 5: You will repeat steps 2-4 until you get around each leg

Including around any pockets if applicable.

How do you blind hem dress pants with a sewing machine?

The first step is to choose the right stitch for your type of fabric. There are many different options, but they can be organized into four general categories:

Blind hem stitch

Stretch stitch

Narrow zigzag stitch (also called a narrow overlock)

Wide zigzag (also called a wide overlock)

You can follow these steps to blind hem dress pants:

Gather your materials. You will need a sewing machine, dress pants, thread, and a needle.

Fold up the bottom of the pant leg so that the hem is about an inch from the bottom of the pant.

Sew a straight line across the pant leg, about an inch from the bottom.

Cut off any excess thread.

Repeat steps 2-4 for the other pant leg.

What stitch do you use for a blind hem?

The blind hem stitch is the most common stitch used for sewing hems. To create a blind hem, you need to do two passes: one with the right side of your pants facing up and another pass with the wrong side facing up.

When doing this, you should use a machine needle that has a sharp point. This ensures that you don’t have any issues with bunching or puckering on your fabric as it goes through different layers of material.

Your machine also needs to have an adjustable stitch length setting so that you can adjust it depending on what type of fabric you are working with. If it’s too thick or thin, increase or decrease its number accordingly until it suits your needs best!

Do you back stitch on a blind hem?

Yes, you should always back stitch at the beginning and end of a blind hem. This is because with a blind hem, there is no seam allowance, and the fabric will be pulled very tight as you sew it.

If you do not back stitch at both sides of your stitches, they will unravel, and your hem will come undone easily. Back stitching also secures your thread to the fabric so that it does not slip out from under or underneath.

How do you fold pants for a blind hem stitch?

You’ll want to fold your hem under 1/2″ and then again so that the raw edge is facing you while the folded edge (the side of your pant leg closest to you) is facing out. This results in a double layer of fabric that will be stitched into place with a blind hem stitch.

How to hem pants without a sewing machine?

You can hem pants without a sewing machine. There are many ways to do this, but the most common methods are using a serger or a zigzag stitch on a regular sewing machine and a blind hem stitch.

If you have access to a serger, it’s as simple as following the instructions that came with your machine. If not, here are some instructions for how to make your blind hem stitch by hand:

Use thread that matches the color of your pants

Put some pins in at an angle along where you want them to be sewn

Sew and the cloth underneath the pins – they’ll act like guides while keeping everything in place during stitching.

What is the Best stitch for hemming pants by hand?

If you’re using a sewing machine, the best stitch for hemming pants is the blind hem stitch. This is also called an invisible hem stitch used on fabrics and knits. The blind hem stitch creates a flat edge that’s not bulky or bulky.

It’s also perfect when you want to keep the original decorative seam on your pants or skirt hemline but still have a neat finish at the bottom of your garment. The first step in this type of seam is marking where to sew along with some straight pins (or basting thread).

You can mark your desired length by pinning down each side of where you’d like to sew before removing pins again – this way, and there won’t be any mistakes! Then just sew all around until finished!

How to do Invisible hem stitch by hand

The Invisible hem stitch is a trendy hemming method used to make hems look flat and neat inside the garment. It’s perfect for slippery fabrics, like silk or satin, because it will not unravel if someone pulls on it. Plus, you don’t need to worry about what thread you use; this stitch looks excellent with all types of fabric and thread colors!

To Hand Sew: Begin by folding over one edge of your fabric so that it meets up with the other side (you’ll have a double-folded edge). Then take your needle and thread through from under both layers at once—this creates an invisible stitch that disappears when pressed flat.

To Sew by Machine: Set up your machine for sewing an “Invisible” seam (if you’re unsure how to do this, then see our article here.) Simply sew along one raw edge with very short stitches (1/8″ long). This is best done using matching or contrasting thread colors to blend in better.

Frequently Asked Questions

How to Blind Hem Stitch Pants?

A blind hem stitch can be done by folding the fabric, making small stitches on the folded edge, and then catching a small piece of the main fabric with each stitch.

How to Do a Blind Hem on Pants?

A blind hem can be achieved by using a special blind hem foot on your sewing machine, which folds the fabric and stitches a small zigzag stitch to secure it in place.

How to Hem Pants by Hand?

To hem pants by hand, fold the fabric up to the desired length, then use a needle and thread to make small stitches along the folded edge, securing the hem in place.

How to Do Invisible Stitch Sewing Machine?

To do an invisible stitch on a sewing machine, use a blind hem foot or a zigzag stitch to secure the folded fabric in place.

How to Hem Jeans with Sewing Machine?

Hemming jeans with a sewing machine requires a heavy-duty needle and thread. Fold the fabric up to the desired length, then sew a straight stitch along the folded edge.

What Is the Best Sewing Machine for Hemming Pants?

The best sewing machine for hemming pants is one that has a blind hem foot or a zigzag stitch, as these can create a clean, professional-looking hem.

How to Do Hemming Pants That Can Be Undone Later?

To hem pants that can be undone later, use a basting stitch to secure the hem in place. This stitch can be easily removed if you need to let the hem down later.

How to Hem Jeans on a Sewing Machine?

Hemming jeans on a sewing machine requires a heavy-duty needle and thread. Fold the fabric up to the desired length, then use a straight stitch to secure the hem in place.

Conclusion

You can blind hem pants with a sewing machine in a few different ways. The first method is to use a unique foot for blind hemming. The second method is to use a zigzag stitch. Whichever method you choose, practice on a scrap piece of fabric first, so you get the hang of it.